Profilium™ High Efficiency Steel Grit
W Abrasives™ reliable, quality, high carbon steel media that exceeds the topmost manufacturing standards
PROFILIUM™ is a very hard “Premium” steel grit, specially developed for speed and consistency on air blasting surface preparation operations. The ready-to-use operational mixture granulometry of the new product simplifies the addition process to obtain a constant and powerful surface profile. In terms of efficiency, PROFILIUM® has no rival on the market. It’s also a high performance alternative to chilled iron.
Users benefits
Users benefits
Airblast optimized
Premium product
Ready-to-use operating mix
Performances
Performances
Markets and applications
Markets and applications
Surface preparation
Railways & Shipyards
Wind turbines
Contractors/Bridges and tanks
Specifications
Specifications
| Product name | PR 16 | PR 23 | PR 30 | PR 45 | PR 58 | PR 85 |
| Nominal size (Sieve #) | 1,18 mm (#16) | 1,00 mm (#18) | 0,71 mm (#25) | 0,60 mm (#30) | 0,42 mm (#40) | 0,125 mm (#120) |
| Comparable Chilled Iron (for information only) | G39 – G47 | G17 – G24 | G12 | G07 | ||
| Hardness | > 64 HRC (>800 HV) | |||||
| Density | Absolute ≥ 7.3 g/cm3
Apparent ≥ 4 g/cm3 |
|||||
| Chemical composition | C ≥ 0.80%, Si ≥ 0.40%, 0.60% ≤ Mn ≤ 1.20%, S ≤ 0.05%, P ≤ 0.05% | |||||
| Conductivity | < 30 μS/cm | |||||
| General shape | Angular | |||||
| Microstructure | Fine and homogenous martensite | |||||
| Specifications | Meets SAE J1993 High Carbon Cast Steel Grit, SAE J445, SSPC AB3… (except size distributions) *Certificates available upon request. | |||||
| Packaging | BOXED BAGS
1000 kg (2,205 lb) 40 bags of 25 kg (55 lb) per pallet
BIG BAG 1000 kg (2,205 lb)
DRUM 1000 kg, 771 kg |
|||||
*Document for informational purposes only. Not contractual. Contact your local representative for latest version of the technical data sheets
You may also like
You may also like
Premium steel media
This exclusive combination of a Premium Product ensuring better performance than standard products, and a Premium Service to guarantee the optimum use of these products in order to obtain better results in terms of quality and cost, is a pillar of the W Abrasives philosophy.
HPG
HPG, our Premium cast steel media for foundries, is an angular abrasive specifically designed to improve the cleaning and descaling performance of shot blasting. It works faster, makes cleaner parts and lasts longer than typical cast steel shot used in foundries. Its ability to remove and clean sands, resins or steel scale is unmatched.
Discover HPG
Surfium
Premium quality steel abrasive with a very narrow hardness range (+/- 1.5 RHC) to give a consistent surface profile.
Discover Surfium
Stainium
STAINIUM® is specially developed for descaling applications when little roughness is required at the end of the process. Specially available in fine grades, STAINIUM® provides a more stable operating mix.
Discover Stainium
Hybrid Shot
HYBRID SHOT was developed specifically to address new demands for desanding in foundries and descaling in forges and wire drawing plants.
Discover Hybrid Shot
ProWheelium
PROWHEELIUM® is a steel grit with a very narrow hardness range for surface preparation before coating, painting, enameling, metallizing. It was developed specially for customers who use GH hardness grit in wheel machines. PROWHEELIUM® considerably reduces machine wear and abrasive consumption.
Discover ProWheeliumCase Studies & news
Case Studies & news
Resources & downloads
Resources & downloads
